STANDARD ANNUAL INSPECTION

PRICES START AT ONLY £184 (SINGLE AXLE)

OVERVIEW-

Check condition and security of body panels  

Check operation of door locks, catches and hinges and lubricate

Check condition and security of all trims, inserts and sealants  

Check windows and seals for damage

Check condition and security of grab handles 

Check security of body attachments (ladders, aerials, cycle racks etc)

Bodywork Interior  

Damp meter test ( see attached report )  

Check floor for delamination  

Check operation of cupboard hinges, catches, locks and stays   

Check operation and condition of all window catches, stays and seals  

Check operation and security of all skylights   

Check operation of blinds and fly screens. Adjust if required  

Check fixed ventilation openings for free flow of air


Water System and Appliances 

Check operation and condition of water pump  

Check operation of pressure switch and adjust if required  

Check condition of water filter  and housing (replace filter if required)  

Check operation of taps and shower fittings (including external taps if fitted)  

Check overall condition of fresh and waste water pipes and fittings   Check toilet for operation and condition of seal, blade and flush  

Check drain plugs for seal and operation ( Drain down system in winter )

Gas Supply and Appliances

Fridge not serviced unless requested  

Check regulator performance and carry out leak test  

Check condition and date of flexible hose  

Check condition and security of all pipe work  

Check condition of LPG sticker on locker and security of gas bottles  

Check gas dispersal holes for obstructions  

Check fridge ignition, FFD and cooling   

Check operation of cooker, hob and oven. Ignition, flame and FFD  

Check operation of space heater. Ignition, flame, FFD and CO room test  

Check operation of water heater. Ignition, flame, FFD and heating  

Check operation and condition of external gas point if fitted

Electrical Systems 240v 

 Check condition of inlet plug and hook up cable (when available)  

Operation of RCD, MCB’s and earth bonding  

Check condition of wiring, sockets and fixed connections  

Check operation of battery charger  

Check mains operation of fridge   

Check mains operation of cooker and hob  

Check mains operation of water heater  

Check mains operation of space heater


Electrical Systems 12v  

Check condition of 12N and 12S plugs and cables  

Check condition and operation of road lights and reflectors  

Check condition of wiring, sockets and fuses  

Check functions of 12S system ( charging, fridge, lights etc)  

Check operation of battery charger  

Check condition of battery. Clean and lubricate terminals   

Check operation of all 12v lights including awning light  

Check blown air system


Fire and safety 

Check condition of security, smoke and carbon monoxide alarms  

Check condition, type and expiry date of fire extinguisher   

Check condition and location of fire blanket  

Check operation, function and safety of DIY additions


Chassis and Running Gear  

Check coupling head and safety catch for wear and lubricate if required  

Check and clean pads on ball acting stabiliser  

Check condition and routing of breakaway cable and clip  

Check operation of overrun piston and lubricate  

Check operation of jockey wheel clean and lubricate  

Check operation of handbrake and lubricate  

Check brake rods, cables and supports  

Remove wheels and check tyres for wear, damage, age and pressure  

Remove brake drums check bearings, seals and linings. Clean and lubricate  

Replace drum with new split pin or one shot nut and torque as required  

Adjust brakes at drum and check free play in the linkage and at handbrake  

Replace road wheels and torque wheel nuts / bolts to manufacturers settings  

Check condition and security of chassis and attachment to body  

Check operation of suspension assemblies  

Check corner steadies operation and lubricate  

Check spare wheel carrier and folding step for operation and lubricate


AS YOU CAN SEE WE CARRY OUT A COMPREHENSIVE SERVICE AND INSPECTION, THIS WILL USUALLY TAKE AROUND 3 1/2 TO 4 HOURS DEPENDING ON THE CARAVAN AND WHAT OUR ENGINEER FIND


PLEASE VISIT OUR MAIN WEBSITE - L.M.C.S (LINCS MOBILE CARVAN SERVICES) FOR FULL DETAILS AND FURTHER INFOMATION.